To reset an Epson L360 printer, you can follow these steps:
1. Make sure the printer is turned on and connected to your computer.
2. Download the Epson Adjustment Program for L360 from the official Epson website or other trusted sources.
3. Extract the downloaded file and open the "Adjprog.exe" file.
4. A window will appear with several options. Click on the "Particular Adjustment Mode."
5. From the drop-down menu, select "Waste ink pad counter" and click on "OK."
6. A new window will appear showing the current ink pad counter value. Click on the "Check" button.
7. If the ink pad counter value exceeds the limit, you need to reset it. Click on the "Initialization" button.
8. A warning message will appear stating that the ink pad counter will be initialized. Click on "OK" to proceed with the reset.
9. Wait for a few moments until the reset process is completed. A confirmation message will appear on your screen.
10. Turn off the printer and disconnect it from the computer.
11. Turn on the printer again. The Epson L360 printer reset process is now complete.
Note: The ink pad counter reset is to remove the message displaying "Service Required" or "Service Requested" due to the waste ink counter being full. This process does not replace or refill ink pads or cartridges.
No comments:
Post a Comment